contourPATTERN STUDIOA little shape. A lot of possibility.Lighting lab ↗
YOUR NEXT OBJECT

Made of lines.
Full of character.

One shape, two colors, endless rhythms.

Building your object…
↔ Drag to rotate · Scroll to zoom80 × 120 mm
FROM SCREEN TO SHELF

Your first print.

The 3MF contains a two-part assembly with alternating filament assignments and an A1 process preset. Choose the nozzle actually installed and load two PLA colors in AMS Lite.

  1. Open the project in OrcaSlicer. Keep the project settings and the two parts together.
  2. Assign the two filament slots to your loaded spools. Confirm the selected preset: 0.4 mm nozzle → 0.20 mm layers / 0.60 mm width; 0.8 mm nozzle → 0.40 mm layers / 1.20 mm width.
  3. The infill setting fills the modeled solid floor; the cavity remains open because it is built into the mesh. Slice and inspect several layers: one color per layer, continuous walls, an open mouth, and a solid vase floor.
  4. Start with a short sample. Tune PLA temperature and flushing for your actual filament.

The lampshade option removes the floor. It is a shade shell, without a socket mount; use a cool LED light source.

This reproduces an alternating, displaced-contour technique. A match to any photographed product needs a physical test. Color and texture previews depend on lighting. Decorative vases are not guaranteed watertight.

Kootzy.in exports permit personal and commercial physical printing. Digital redistribution is prohibited. Imported artwork retains its own rights. The license notice is included in each 3MF.

Technique research: BumpMesh_Color · Library licenses